|
| |
ANCHORS
Chromate Anchors are uniquely designed for
super fast installation and maximum working load.
Use Chromate Anchors for all your wall, floor and ceiling anchoring applications.
 |
Hollow Wall
Anchors:
-
CIC 200™ Superfast™ Anchors -- install directly into
drywall, and a fixture attached, in less than one minute. No need to
pre-drill a hole as the anchor's unique self-drilling point allows you to
drill and install in one easy step.
-
CIC 200™ Superfast™ Toggle Anchors
-- self-drilling for extremely fast installation while providing superior
holding power from the unique, positive clamping action of the toggle
bolt.
-
Screw Type Toggle Bolt Anchors
-- Phillips/Slotted Combo Round Head for fast and easy
assembly. Die cast triunion nut has more threads than standard toggle
making it stronger and more reliable. Unique design provides greater
strength.
-
Tap-In Hollow Wall Anchor -- Use #6 or #8 screws with
this fast, easy to use expansion anchor. As the screw enters the anchor,
it engages the pre-formed tabs on each side causing them to expand
outwards into the base material. Easy removal leaves only a small slit on
the wallboard. Anchor lightweight fixtures, supports and accessories to
wallboard without pre-drilling.
Masonry Anchors:
-
CIC 200™ Anka Bolts -- strongest, most versatile anchoring
device available for solid or hollow masonry materials.
-
Sleeve Anchors -- for use in
foundations, floors, walls, ceilings, concrete block, stone, tile, brick
and marble. Gives maximum holding power. Pre-assembled and ready-to-use.
No need to reposition equipment, just drill and install. The heavier the
load, the harder they hold.
-
Stud Anchors -- use for heavy
duty fastening applications where high pullout values are required.
-
Expansion Shields -- designed
for light to medium duty fastening in concrete, mortar joint, masonry and
brick.
-
Drop-In Anchors -- used in medium to heavy duty
applications such as concrete and stone.
-
CIC 200™ Super Hold Anchors -- high expansion capacity and
pull out strength. Ribbed construction gives maximum holding power. Spiral
design keeps screw centered while maintaining equal expansion on all sides.
Specially designed wings prevent anchor from spinning or falling out.
-
CIC 200™ Cement Screws -- self-tapping screw type anchors
work fast and securely in all types of masonry applications. Designed for
ultimate pullout strength. Special high, sharp thread cuts deep and easily
while low thread provides stability for accurate driving. Removable --
repairs and adjustments of installed components are made easy because our
fastener can be removed and re-inserted in the same hole.
-
CIC 200™ Cement Bolt Anchors -- serrations under head for
superior holding power. Removable, reusable and vibration-resistant.
Layout or hole spotting is eliminated -- can be drilled and set with
fixture in place. Works in base materials such as concrete, block and
brick.
|
|
CIC 200™ Special Anchors: |
Multi-Purpose Wall Anchors: |
|
|
-
CIC 200™ Hammer-Lock Anchors
-
Drop-Tite™ Anchors
-
Drop-Tite™ Anchor Screens
-
Security Picture Hanging Hardware
-
Hammer Drive Stud Anchors
-
Taper Bolt Anchors
|
-
Zip-Quick™ Plastic Wall Anchors
-
Multi-Toggle Plastic Wall Anchors
-
Nylon Flanged Anchors
-
Butterfly Toggle Plastic Wall Anchors
|
|
