Corporate Office: 5250-A Naiman Parkway, Solon, OH 44139

Warehouses:  Atlanta, GA  ~  Solon, OH  ~  Long Island, NY

Toll Free: 1-800-BUY-BOLT   ~   Fax: 631-567-2418   ~   www.chromate.com

HAND HELD INDUSTRIAL POWER TOOLS

Craftsman 6.5 amp Trim Saw, 5-1/2 in. Blade
Part #9-2754   $232.24
Compact and lightweight, yet cuts finished 2 x 4 at 90 degrees. 4,000 rpm speed. Blade on left side for better viewing of cut line.

Craftsman 14.4 volt Cordless EX Right Angle Drill/Driver
Part #9-10153   $161.28
3/8 in. 2-sleeve metal rear chuck, 700s motor, 1 speed gear box. Forward/reverse/VSRB switch, 1500mAh cell, 2 ppks, 1 hour universal charger. 2 bits, lanyard.

Craftsman Laser Trac™ 14 amp Circular Saw with Case
Part #9-10860   $135.24
For the straightest cuts possible, the laser beam forms a straight line on the wood. Motor operates at 5000 rpm. Carbide-tipped blade for 2-3/8 in. Depth of Cut at 90 deg., 1-13/16 in. at 45 deg.

Craftsman 3.6 volt Cordless ScrewDriver
Part #9-11139   $38.63
3.6 volts and accepts 1/4 in. Hex collet, any standard nut/screw driver bits. Planetary spur Gears provide power and torque and integrated worklight is equipped with remote cutoff switch.

Craftsman 14.4 volt Cordless EX™ Impact Driver
Part #9-11403   $282.26
Variable speed impact driver with 2 battery packs and blow molded case. Braking switch, 1 hour universal charger, mid-handle design with firm grip feature for balance and comfort.

Craftsman 19.2 volt Cordless Reciprocating Saw
Part #9-11427   $201.61
Reciprocating saw has variable speed 0-3100 spm, 7/8 in. blade stroke, tool-less blade clamp, adjustable front shoe. Includes battery packs, 2 blades and charger.

Craftsman 4 pc. 19.2 volt Cordless EX™ Drill Set
Part #9-11432   $383.08
Includes 1/2" drill/driver, trim saw, fluorescent light and reciprocating saw. 2 battery packs, 5-1/2" carbide D.E. bits, edge guide, manuals and storage case.

Craftsman 6 pc. 19.2 volt Cordless EX™ Drill Set
Part #9-11436   $322.59
Includes trim saw, 1/2" drill driver and flourescent light plus 2 batteries, 5-1/2" carbide blade, 2 D.E. bits and convenient storage case.

Craftsman 3/8 in. Chuck Cordless EX™ Drill
Part #9-11443   $120.96
12.0 volts. T-handle drill with 3/8" chuck, 24-position clutch, forward/reverse switch with overmold, 2 speed gear box and bubble level. Includes 20 accessory bits.

Craftsman 3/8 in. Chuck Cordless Drill
Part #9-11451   $100.79
9.6 volts. Keyless chuck, VSR, 2 speed. 300/600 RPM. Includes battery, 7 bits and case.

Craftsman 14.4 volt Cordless EX Drill/Driver Kit
Part #9-11453   $181.45
2-speed, reversible 0-400 and 0-1400 rpm. 3/8 in. keyless chuck. 24-position clutch, T-handle grip design for added comfort and control. Includes 2 bits 2 battery packs, 1 hr. charger, case.

Craftsman 3.0 amp Orbital Sander
Part #9-11636   $113.72
Random orbit. Dust collector. 13,000 OPM. 5" diameter with vac holes.

Craftsman 4-in-1 Multi-Sander with Interchangeable Pads
Part #9-11682   $124.79
Random orbit base. Finishing base provides fine finish sanding of wood or metal. Attach detail sander pad and get into tight areas usually reserved for "finger" sanding. 1.4 amp, 1/5 hp motor delivers 10,500 orbits per minute. Build-in sawdust collection includes bag and vac adapter. Hook/loop base. Auxiliary handle rotates around housing and locks in front or either side. Includes two 5" sheets of sandpaper and wrench. 6' cord.

Craftsman 3 x 21 in. Belt Sander, 7.5 amp
Part #9-11726   $141.12
Delivers 1300 SFPM. Lever belt release for easy belt changes. Flush sanding on 1 side. Trigger with lock-on for control. 8 ft. cord with cord clip. Includes dust bag and Sanding Belt.

Craftsman 3 x 21 in. Variable Speed Belt Sander
Part #9-11727   $201.61
Easy-to-adjust variable speeds of 800-1300 SFPM. 8 amp motor, lever belt release for easy belt changes. Trigger with lock on. Flush sanding on 1 side. Includes dust bag, 4 belts and case.

Craftsman 8.0 amp Reciprocating Saw
Part #9-17173   $120.96
Powerful motor and tooless blade clamp w/easy lever action for fast blade changes. Variable speed 0-2400 SPM (no load) with a 6-position speed dial to adjust cutting speed for more controlled cutting.

Craftsman 5 amp Orbital Jigsaw, Multi-Position with Scrolling Action, Carrying Case
Part #9-17242   $115.92
Metal front end, switchable tool-less blade change, accepts both U & T shank blades. Soft grip, light, orbital action. Scrolling on tool blade storage, dust blower switch, vacuum port, variable speed.

Craftsman 3/8 in. x 25 ft. Air Hose and Reel, Heavy Duty
Part #9-18999   $362.55
All-weather design is ideal for service centers, aircraft maintenance, farm and ranch. All-steel construction with multi-position guide arm for mounting on floor, wall, ceiling bench or in pit.

Craftsman Bench Grinder Stand
Part #9-19210   $144.13
Bolts to floor (bolts not included) and includes cast iron cooling pot. Use with grinders 21128, 21126, 21125 and 21150.

Craftsman Professional 6 in. Bench Grinder
Part #9-21152   $148.40
120v 60Hz induction motors. Removable key switch. Independently operable flexible lamp. Eye shields. Spark arrestors. Ball-bearings. Top mounted wheel dresser and clip. Cast iron base pre-drilled for bench mounting. Water cooling trough. Two "U" shaped adjustable flat tool rests with detachable bit sharpening tray.

Craftsman Professional 10 in. Bench Grinder
Part #9-21160   $555.35
Keep your drill bits, chisels, shears and more in tip top condition. Powerful 1 hp motor with 2.0 max developed hp. Operates at 1725 rpm. 10 in. diameter wheels with 1 in. face. Locking rocker switch.

Craftsman Professional 6 in. Disc Sander
Part #9-21536   $222.14
4 x 36 belt. 6-1/4" x 8-7/8" interchangeable tilting aluminum table can be used on either belt or disc. Cast iron base. Quick tension release lever for belt changes. Keyed on/off switch. Sanding belt dust extractor. Miter gauge included. 2/3 hp max. developed enclosed motor.

Craftsman Professional 13 in. Planer, Bench Top
Part #9-21743   $786.48
Features 15 amp, 2-1/2 hp max developed motor with 8,000 rpm cutterhead speed. 2 double-edged knives of HSS deliver 16,000 cpm. Dust collection system with half bag for use with a plastic bag.

Craftsman 12 in. Benchtop Drill Press
Part #9-21912   $333.23
6" spindle to column, 2/3 hp, 5 speed, 540-3,600 rpm, chuck type JT33, 1/2" chuck size, 10-1/4" x 8-1/2 table size, table tilt, table swivel, spindle travel 2-3/8", 2-11/32" column size, rack and pinion table elevation, linear rod depth scale. Includes fence.

Craftsman Professional 10 in. Laser Trac™ Radial Arm Saw
Part #9-22010   $1,108.94
Featuring Laser Trac™ cutting guide. Laser line is designed to assist the operator in aligning the blade to the cut. Powerful 1.5 hp (3 hp max. developed) induction motor provides the power required for even the toughest cutting jobs. "Control Cut" trigger actuated, variable speed, feed rate control mechanism ensures accuracy and controls rate of the cut. Sturdy, 27" x 44" MDF work surface, accommodates large work-pieces. Built in accessory shaft accepts a variety of optional accessories. Rugged, stamped steel stand with support stringers and non-skid adjustable feet. Includes 10" x 40T carbide blade. Automatic blade brake stops blade in seconds. Motor offers dual voltage, 13/6.5 amp capacitor start and capacitor run operation. Tactile gripped unit controls grouped by function for ease of use.

Craftsman Multi-Action Work Support
Part #9-22293   $77.27
Single roller stand, support stand and multi-directional all in one. Supports up to 200 lbs. and extends up to 43.5 in. Features gauge steel frame and Ball Bearings in all rollers.

Craftsman Professional 14 in. Band Saw
Part #9-22424   $925.92
10 amp, 120V ball bearing capacitor start motor, 14" throat capacity, 6" max. depth of cut. 2700 FPM blade speed. Uses 1/8", 1/4", 3/8", 1/2", 3/4" blades from 91-1/2" to 93-1/2" long. Two 13-5/8" die cast aluminum wheels. 14" x 14" cast iron table tilts 15 deg. L and 45 deg. R. 2-piece hinged metal cover. Cast iron frame. Dust collection chute, wheel cleaning brushes. Includes stand, miter gauge, on/off switch with removable locking key.

Craftsman 6 x 9 Belt/Disc Sander with Dust Collection
Part #9-22593   $776.28
Features 10 amp, 1-1/2 hp belt drive motor, stationary 6 in. belt and 9 in. disc. Belt travels at 2700 FPM and a 9 in. disc travels at 3500 RPM. Comes with built-in dust collection with bag.

Craftsman Professional 10 in. Table Saw
Part #9-22849   $1,110.74
1.5 hp, 13 amp capacitor start/run induction motor with slip resistant, v-notch belt drive system. 3,450 rpm. Cast iron body with stamped steel stand. Rips 24" left and 24" right of blade. The Align-A-Rip precision milled aluminum rail works with a self-aligning quick-release rip fence.

Craftsman 17 in. Floorstanding Top Drill Press
Part #9-22917   $796.18
8-1/2" spindle to column, 3/4 hp, 1-1/2 max. dev. hp, 16 speed, 200-3,630 rpm, chuck type JT3, 5/8" chuck size, 14-1/4" x 14-1/4 table size, table tilt, table swivel, spindle travel 3-1/4", 3-1/8" column size, built-in-light, rack and pinion table elevation, linear rod depth scale. Includes fence.

Craftsman 20 in. Drill Press, 3/4 in. Chuck, Stationary
Part #9-22920   $1,203.15
10-1/4 in. Spindle to column. 3/4 rated hp, 2 max. dev. hp. 12 speeds, 150-4200 rpm range, 3/4 in. chuck size.
Table tilt. 4-22/32 in. spindle travel. 3-1/3 in. column size.

Craftsman Laser Trac™ 15 in. Drill Press
Part #9-22925   $645.20
2/3 hp max developed motor, 12 speed (250-3100), Laser Trac™ laser attachment, left/right feed handle. 5/8 in. keyed chuck, sliding extension table, Rack and Pinion Table Elevation.

Craftsman Professional 8 in. Bench Grinder
Part #9-24118   $132.23
3,450 rpm motor develops up to 1/2 hp delivering plenty of power for most applications. Thin line motor housing for easy grinding of longer materials. Flexible light with independent on/off.

Craftsman 9 in. Drill Press
Part #9-24803   $182.98
Drill press w/3 in. vise, 2 in. sanding drum, fence & backstrap, 3 sanding drum sleeves (fine, medium, coarse). 1/3 hp motor for long-lasting, smooth operation. 5 sp. settings for various materials.

Craftsman Professional 40 pc. Screwdriver Bit Set
Part #9-25607   $38.24
With case. Industrial quality alloy tool steel bits. Includes seven nutdrivers (7/16", 3/8", 11/32", 5/16", 9/32", 1/4", 3/16"); three double-end bits (#1 Phillips/6-8 slotted, #2 Phillips/8-10 slotted, #3 Phillips/10-12 slotted); six 3-1/2" extended reach power bits (#1, #2, #3 Phillips and 6-8, 8-10, 10-12 slotted); twenty-four 2" power bits (three #1 Phillips, five #2 Phillips, three #3 Phillips, three 5-6 slotted, three 6-8 slotted, three 8-10 slotted, two T15 Torx, two R2 square recess).

Craftsman Professional 30 pc. Screwdriver Bit Set
Part #9-25633   $20.14
30 piece slotted and Phillips screwdriver bit set.

Craftsman Professional 31 pc. Magnite Bit Set
Part #9-25647   $52.35
With 8" magnetic hand driver. Includes three slotted insert bits (5-6, 6-8, 8-10); three Phillips insert bits (#0, #1, #3); three Square insert bits (R1, R2, R3); five Torx bits (T-15, T-20, T-25, T-30, T-40); two 2" Phillips powerbits (#1, #2); two 2" slotted powerbits (5-6, 8-10); C-3 clutch insert bit; five Hex bits (5/64", 3/32", 7/64", 1/8", 3/16"); P2R Phillips drywall bit; two P2 Phillips insert bits; two Screw finders; 3" magnetic bit holder. Plastic case.

Craftsman 11 pc. Speed-Lok™ Drill/Driver Modular Set
Part #9-26171   $40.25
Includes drive shaft, hex coupler, four countersink inserts (No. 6 x 3/32 in., No. 8 x 7/64 in., No. 10 x 1/8 in, and No. 12 x 1/8 in.), five screwdriver bits (Phillips No. 1 three each No. 2, No, 3).

Craftsman 16 pc. Speed-Lok™ Drill Bit Set
Part #9-26172   $40.25
Speed-Lok™ 16-pc. set includes quick connector, screw guide, drill bits and screwdriver bits. Fits any drill and allows you to change bits without re-chucking.

Craftsman Professional 31 pc. Speed-Lok™ Power Drill/Driver Set
Part #9-26186   $59.33
This 31 piece power drill/driver bit set is perfect for any job. For use with the Speed-Lok™ system. Comes with convenient carrying case.

Craftsman Professional Router Table
Part #9-26463   $504.05
The 27 x 18 in. die cast Table top provides a large 486 sq. in. of workspace. The portable design makes this table perfect for job site or workbench use.

Craftsman Professional Large Stationary Routing Center
Part #9-26464   $579.69
27 x 18 in. table top gives you 486 sq. in. of work space. Portable design for job site or workbench use. Features are extruded aluminum router table fence. 25" high floor stand. Include 2 feather boards for additional work piece hold down.

Craftsman Professional Router Table Floor Stand
Part #9-26478   $152.65
Heavy-duty steel floor stand positions router table and incorporates non-slip leveling feet. Floor stand has two steel shelves for storage. Floor stand will accept all router tables made since 1997. Tool not included.

Craftsman Replacement Blade for 6-1/8 in. Twin Cutter Saw (26829)
Part #9-26677   $96.60
2 carbide-tipped blades with Teflon coating for fast, smooth, clean cuts in wood, wood-based materials, plastic, roofing materials*, steel, aluminum**, copper**, and stainless steel.

Craftsman Professional 7.8 amp Hammerdrill, 1/2 in.
Part #9-26726   $325.14
7.8 amp motor provides high performance and overload protection, with high/low speed for high speed drilling or high torque applications. Dual mode: hammerdrill/drill for wood, steel, masonry.

Craftsman Professional 2.5 Amp Rotary Grinder
Part #9-26756   $201.61
1/4 hp rotary grinder with 2.5 amps of power for your heaviest needs. 26,500 rpm for fast material removal and a smooth finish. Accept 1/4 and 1/8" shanks (with adapter, included).

Craftsman 10 in. x 24T Saw Blade
Part #9-26780   $107.48
Rip type. 24 teeth, 5/8 in. Arbor size.600 Grit diamond wheel sharpening. Blade is heavy duty, laser cut with heat treated plates to deliver professional quality results.

Craftsman 12 in. x 24T Saw Blade, Rip, Wood Workers Choice
Part #9-26784   $107.48
600 Grit diamond wheel sharpening provides the sharpest teeth in the industry on this premium Craftsman Professional® blade. European style Dyanite Carbide™ teeth.

Craftsman 12 in. x 80T Saw Blade, 1" Arbor, Trim/Finish
Part #9-26785   $152.31
Industrial tolerances. Hand hammered and tensioned. European style Dyanite Carbide™ teeth.

Craftsman 8 in. x 40T Saw Blade, 5/8" Arbor, General Purpose/Smith
Part #9-26786   $62.66
Hardened plate. European style Dyanite Carbide™ teeth.

Craftsman 9 in. x 40T Saw Blade, 5/8" Arbor, Master Combo
Part #9-26788   $77.01
Hardened plate. European style Dyanite Carbide™ teeth.

Craftsman 10 in. x 40T Saw Blade, 5/8" Arbor, General Purpose
Part #9-26789   $152.31
Hardened plate. European style Dyanite Carbide™ teeth.

Craftsman 10 in. x 50T Saw Blade, 5/8" Arbor, Master Combo
Part #9-26790   $80.60
Hardened plate. European style Dyanite Carbide™ teeth.

Craftsman 10 in. x 60T Saw Blade, 5/8" Arbor, Aluminum/Laminate
Part #9-26791   $143.34
Hardened plate. European style Dyanite Carbide™ teeth.

Craftsman 10 in. x 72T Saw Blade, 5/8" Arbor, Trim
Part #9-26792   $98.52
Hardened plate. European style Dyanite Carbide™ teeth.

Craftsman 8-1/4 in. x 24T Saw Blade, Fast Cut Combo
Part #9-26793   $35.78
Carbide blades stay sharp up to 10 times longer than standard steel blades. Feature anti-friction silver-coat finish that resists pitch and gum build-up for faster cooling running blades.

Craftsman 10 in. x 24T Silver Series Carbide Tipped Blades, 5/8" Arbor, General Purpose/Fast
Part #9-26795   $44.74
European style Dyanite Carbide™ teeth. Reduced kick-back shoulder design.

Craftsman 10 in. x 40T Saw Blade, Carbide
Part #9-26796   $48.32
Smooth cut miter. 40 teeth, 5/8 in. Arbor size. Features auto friction silver-cote finish that resists pitch and gum build-up. Computer designed control feed shoulders.

Craftsman 10 in. x 60T Saw Blade, Trim/Finish
Part #9-26798   $78.81
Carbide blades stay sharp up to 10 times longer than standard steel blades. Feature anti-friction silver-coat finish that resists pitch and gum build-up for faster cooling running blades.

Craftsman 10 in. x 80T Saw Blade, Fine Finish Miter
Part #9-26800   $116.46
Carbide blades stay sharp up to 10 times longer than standard steel blades. Feature anti-friction silver-coat finish that resists pitch and gum build-up for faster cooling running blades.

Craftsman 12 in. x 30T Silver Series Carbide Tipped Blades, 1" Arbor, General Purpose/Miter
Part #9-26801  $98.52
European style Dyanite Carbide™ teeth. Reduced kick-back shoulder design.

Craftsman 12 in. x 80T Saw Blade, Trim/Fine Finish
Part #9-26802   $125.42
Carbide blades stay sharp up to 10 times longer than standard steel blades. Feature auto-friction silver-coat finish that resists pitch and gum build-up for faster cooling running blades.

Craftsman 12 in. x 60T Saw Blade, Carbide
Part #9-26804   $116.46
Fine finish miter. 60 teeth, 1 in. Arbor size. Features auto friction silver-cote finish that resists pitch and gum build-up. Computer designed control feed shoulders.

Craftsman 18.0 volt Cordless 1/2 in. Square Drive Impact Wrench
Part #9-26825   $604.87
180 ft./lbs of ultimate torque. 2200 impacts per minute, 0 to 2200 rpm free speed. Soft grip handle dampens vibration.

Craftsman 6-1/8 in. Circular Saw, Twin Blade Cutter
Part #9-26829   $347.80
7.8 amp, 1.25 hp (max dev.) motor provides the torque, power and durability for a variety of sawing jobs. The twin-blade system is great for wood, plastic, copper, aluminum, stainless steel and more.

Craftsman 3.5 hp Plunge Router
Part #9-26835   $483.05
15 amp motor, dial speed control/soft start. Electronic feedback, shaft lock, micro depth adjustment knob. 1/2 and 1/4 in. collets.

Craftsman 12.0 volt Cordless Drill
Part #9-26926   $309.35
Features dual gear ranges to select a suitable speed, Spindle Lock for one-handed bit charges and adjustable 24-position torque clutch. Mid handle design and comfort grip trigger.

Craftsman 1/2 in. Chuck Cordless Drill
Part #9-26927  $367.88
14.4 volts. Keyless chuck, VSR. 0-400/0-1400 rpm. Adjustable torque. Includes 2 batteries, charger, 2 bits, auxiliary handle, depth rod and case.

Craftsman 1/2 in. Chuck Cordless Hammerdrill
Part #9-26928  $484.01
18.0 volts. Carbide keyless chuck. 0-400/0-1400 rpm. 0-6, 400, 0-22, 400 BPM. Mode selection dial. Adjustable torque. Includes battery, depth adjustment rod.

Craftsman 1/2 in. Chuck Industrial Rated Drill
Part #9-27110  $310.28
7.0 amps. VSR. Single speed, reversible. Triple reduction gearing. 450 rpm.

Craftsman 6-1/2 in. Cordless Circular Saw
Part #9-27119  $498.86
18.0 volts. 2,400 rpm. Includes 2 batteries, charger, blade, hex wrench and case.

Craftsman 18 volt Replacement Battery Pack
Part #9-27124   $444.98
18 volt. For drills 27127 and 27124. Keep an extra, freshly charged battery on hand and work continuously throughout the day while the other battery charges.

Craftsman Drywall Screw Gun
Part #9-27132  $174.65
6.2 amps, VSR. 0-2500 rpm. Depth control adjustable.

Craftsman 7.8 amp Corded Drill, Variable Speed
Part #9-27158   $269.41
Features electric motor with cut steel helical gearing, 1/2 in. Chuck Capacity and 0-850 rpm speed range.

Craftsman Professional Edge Guide
Part #9-27512   $193.23
Edge guide designed for use with Craftsman Professional 3/4-hp, 3.8-amp Laminate Trimmer model number 27512.

Craftsman 4-1/4 in. Angle Grinder Kit
Part #9-27703   $115.92
7 amp, 1,100 rpm AC/DC motor, dc capability, heavy duty slide lock on switch, ergonomically designed in line grip handle, compact design. 2 position auxiliary handle mounts on either side. Locking spindle provides quick and easy wheel changes.

Craftsman 5 amp Sabre Saw Kit, 1 in. Stroke with Orbital Blade Action
Part #9-27719   $290.77
Variable speed trigger provides extra control of 500-3000 spm. Powerful 3/4 hp motor delivers a 1 in. blade stroke with four position orbital action. Adjustable footplate tilts left and right.

Craftsman 6.5 amp Industrial Biscuit Plate Jointer
Part #9-27730   $342.75
6.5 amp, 10,000 rpm Jointer features rack and pinion fence that vertically adjusts from 0 to 90 degrees. Retractable anti-slip pins help keep material in place while slot is cut.

Craftsman Industrial Heat Gun
Part #9-27801   $193.23
Industrial Heat Gun heats up in only 20 seconds! Features built-in electronic thermocouple control that when used with 5/16 in. reduction nozzle allows gun to concentrate heat with pinpoint accuracy.

Craftsman 2.0 amp Orbital Sander
Part #9-27979   $76.45
Dust collector. 14,000 OPM. Uses 1/4 sheet. Includes sandpaper hole punch.

Craftsman 2.6 amp Orbital Sander
Part #9-27987   $113.71
Random orbit. 12,000 OPM. 5" diameter with vac holes.

Craftsman 3.8 in. Chuck Industrial Rated Drill
Part #9-27994   $193.23
5.5 Amps. VSR. 2 speed gear box, 24 position clutch, auxiliary handle. 0-2,500 RPM.

Craftsman 3.2 amp Corded Drill, Variable Speed
Part #9-27996   $258.26
Work in tight spaces that would normally require a right angle drill. Small grip fits perfectly in the hand for exceptional comfort and control. 1 touch reverse button allows 1 hand use of the tool.

Craftsman 1/2 in. Square Drive Impact Wrench
Part #9-27997   $348.36
7.5 amps. Hog ring, rocker switch. 240 ft./lbs. of torque. 2,100 RPM, 2,700 IPM. 240 ft./lbs. maximum torque.

Craftsman 3-1/8 in. Sabre Saw Blade, 10 tpi Super-Fine Wood Scrolling, 8 pack
Part #9-28755   $8.79
Wood cutting blades of high- Carbon Steel, heat-treated and austempered for durability. Individually ground teeth for the sharpest edge.

Craftsman 3-1/8 in. Sabre Saw Blade, 10 tpi Fine Wood Scrolling, 8 pack
Part #9-28756   $15.82
Wood cutting blades of high- Carbon Steel, heat-treated and austempered for durability. Individually ground teeth for the sharpest edge.

Craftsman 2-3/4 in. Sabre Saw Blade, 20 tpi Super-Fine Wood Scrolling, 8 pack
Part #9-28757   $15.82
Wood cutting blades of high- Carbon Steel, heat-treated and austempered for durability. Individually ground teeth for the sharpest edge.

Craftsman 2-3/4 in. Sabre Saw Blade, 20 tpi General Metal Cutting, 8 pack
Part #9-28758   $15.82
Tough, heat-treated M-2 high-speed steel. Individually ground teeth for the sharpest edge.

Craftsman 3-5/8 in. Sabre Saw Blade, 6 tpi Bi-Metal Fast Wood Cutting, 2 pack
Part #9-28783   $7.03
High-speed steel teeth plus flexible and durable high- Carbon Steel backs. Individually ground teeth for the sharpest edge.

Craftsman 3-5/8 in. Sabre Saw Blade, 10 tpi Bi-Metal General Wood Cutting, 2 pack
Part #9-28784   $7.03
High-speed steel teeth plus flexible and durable high- Carbon Steel backs. Individually ground teeth for the sharpest edge.

Craftsman 2-3/4 in. Sabre Saw Blade, 12 tpi Bi-Metal General Metal Cutting, 2 pack
Part #9-28785   $7.03
High-speed steel teeth plus flexible and durable high- Carbon Steel backs. Individually ground teeth for the sharpest edge.

Craftsman 3-1/2 in. Sabre Saw Blade, 8 tpi Wallboard and Plaster Cutting, 2 pk.
Part #9-28813   $4.39
Blades of high- Carbon Steel, heat-treated and austempered for durability. Individually ground teeth for the sharpest edge.

Craftsman 3 in. Sabre Saw Blade, Knife Edge, 2 pk.
Part #9-28814   $3.43
For use on linoleum, rubber and leather. Blades of high- Carbon Steel, heat-treated and austempered for durability. Individually ground teeth for the sharpest edge.

Craftsman 6 in. x 6 tpi Reciprocating Saw Blades
Part #9-28925   $19.63
6 TPI for cutting wood. 6 in. long bi-metal blades. Package of 5.

Craftsman 6 in. x 10 tpi Reciprocating Saw Blades, 5 pack
Part #9-28926   $19.63
10 TPI for cutting wood and non-ferrous metal. 6 in. long bi-metal blades. Package of 5.

Craftsman 9 in. x 6 tpi Reciprocating Saw Blades, 5 pack
Part #9-28929   $28.61
6 TPI for cutting wood. 9 in. long bi-metal blades. Package of 5.

Craftsman 12 in. x 6 tpi Reciprocating Saw Blades, 5 pack
Part #9-28930   $35.85
Package of five, 12 in. long, 6 tpi bi-metal blades are designed for cutting wood.

Craftsman 6 in. x 24 tpi Reciprocating Saw Blades, 5 pack
Part #9-28931   $19.63
24 TPI for cutting metal. 4 in. long bi-metal blades. Package of 5.

Craftsman Replacement Blades for Planer
Part #9-29459   $62.16
Replacement blades for 13 in. Planer

Craftsman Miter Gauge
Part #9-29937   $71.87
Craftsman Miter Gauge has degree indicator; adjustable positive stops at 90 deg, 45 deg left or right. Fits most band saws and tools with 3/4 x 3/8 in. deep miter groove.

Craftsman 7 in. Carbide Blade
Part #9-32270   $40.43
General purpose type. 24 teeth, 5/8 in. Arbor size. Carbide teeth doubles cutting action for a smooth cut. Laser cut and marked heavy duty harden plates.

Craftsman 7-1/4 in. Carbide Blade
Part #9-32273   $53.70
Smooth trim type. 40 teeth, 5/8 in. Arbor size. Carbide teeth doubles cutting action for a smooth cut. Laser cut and marked heavy duty harden plates.

Craftsman 5-1/2 in. Carbide Blade
Part #9-32276   $17.84
Fast cut combo. 18 teeth. 5/8 in. Arbor size. Features auto friction silver-cote finish that resists pitch and gum build-up. Computer designed control feed shoulders.

Craftsman 5-1/2 in. Carbide Blade
Part #9-32277   $21.42
Fast cut combo. 18 teeth, 10 mm Arbor size. Features auto friction silver-cote finish that resists pitch and gum build-up. Computer designed control feed shoulders.

Craftsman 6-1/2 in. Carbide Blade
Part #9-32278   $19.63
Fast cut combo. 18 teeth, 5/8 in. Arbor size. Features auto friction silver-cote finish that resists pitch and gum build-up. Computer designed control feed shoulders.

Craftsman 7-1/4 x 18T Circular Saw Blade, Fast Cut Combination
Part #9-32279   $16.05
This carbide blade stays sharp up to 10 times longer than standard steel blades. Features auto-friction silver-coat finish that resists pitch and gum build-up for a faster cooling running blade.

Craftsman 7-1/4 in. Carbide Blade
Part #9-32280   $21.42
Fast cut combo. 24 teeth, 5/8 in. Arbor size. Features auto friction silver-cote finish that resists pitch and gum build-up. Computer designed control feed shoulders.

Craftsman 60 pc. Number Size Drill Bit Set
Part #9-52106   $161.30
Industrial-quality bits for use on wood, plastic, metal. High-speed steel is hardened, heat-treated, tempered for long-lasting strength. Precision ground process ensures accurate geometry and hole size, plus fast material removal. Black oxide coating. Includes number sizes 1 thru 60.

Craftsman Drill Extractor
Part #9-52152   $79.01
Drill-Out™ power extractors for extracting broken bolts and screws. The shortened length helps you control the tip with ease. 1/4 in. to 1/2 in., 6 mm to 12 mm.

Craftsman 3 pc. Screw-Out™ Damaged Screw Remover Set
Part #9-52154   $39.55
Removes damaged screws with any variable speed reversible drill or 1/4 in. hex driver. Works on Phillips, slotted, hex, Torx® or square recess heads.

Craftsman Engraver Set
Part #9-61050   $38.57
Tungsten carbide tip adjusts for glass, wood, copper, brass or plastic. Includes indelible ink pen for marking clothes, tools, etc. Stop thief warnings stickers, plastic template for letters.

Craftsman 6 pc. Grinding Point Set
Part #9-64720   $32.12
Grinding points are aluminum oxide. 1/4" shanks. Includes 1" x 1"L, 1" x 1/2"L, 1/2" x 1-1/2"L, 3/8" x 1"L, 3/4" x 1-1/8"L and 3/4" x 1"L.

Craftsman 14 pc. Drill Bit Set, Black Oxide
Part #9-66068   $60.42
Multi-surfaced split point design dramatically improves performance. Delivers faster, more precise drilling. Industrial-quality, high-speed steel. Black oxide finish acts as a lubricant.

Craftsman 29 pc. Drill Bit Set, Quick-Start
Part #9-66084   $161.26
Craftsman Quick-start Bit Sets are ideal for wood, plastic or metal. Split-point, grooved design reduces "walking" to start drilling on contact. Precision ground flutes provide fast material removal.

Craftsman 29 pc. Drill Bit Set, Cobalt
Part #9-66116   $197.75
Metal drill index. Designed to drill in stainless steel. Ideal for drilling in steel, wood, plastic and fiberglass.

Craftsman 15 pc. Drill Bit Set, Cobalt
Part #9-66858   $120.92
Works on the hardest metals. Has a 135 deg. split-point tip so bit won't walk.

Craftsman 29 pc. Zirconium Nitride-Coated Bit Set with Metal Case
Part #9-67029   $201.63
Contains 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 7/64", 9/32", 19/64", 5/16", 21/64", 11/32", 23/64", 3/8", 25/64", 13/32", 27/64", 7/16", 29/64", 15/32", 31/64" and 1/2".

Craftsman 14 pc. Zirconium Nitride-Coated Bit Set with Polystyrene Case
Part #9-67074   $80.59
Contains 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64, 3/16", 7/32", 1/4", 5/16", 3/8" and 1/2".

Craftsman 115 pc. Drill Bit Set, High Speed Steel, Black Oxide Twist
Part #9-67115   $443.98
These high speed steel bits are hardened, heat-treated and tempered for long-lasting strength. Precision-ground process ensures accurate geometry and hole size, and fast material removal.

Craftsman Professional 8 in. Jointer, Stationary, 3 Blade Cutterhead
Part #F9-20651   $3,053.21
Cast-iron In-Feed Table ride on precision-machined dovetail ways for accuracy and rigidity. In-Feed Table has spring-loaded positive stop at 1/8 in., and out-feed table has stop at zero.

Craftsman Professional Belt/Disc Sander, Stationary, 6 x 48 in. Belt and 12 in. Disc with Enclosed Steel Cabinet
Part #F9-22606   $1,572.81
This versatile belt/disc sander features a powerful 3 hp max developed motor for smooth finishes. 4 in. dust collection port on belt and disc. Rocker switch locks off for safety.

Craftsman 15 in. Planer
Part #F9-22615   $2,777.75
Up to 15,000 cuts per minute to smooth finish stock up to 15" wide, 6" deep with maximum 1/8" depth of cut per pass. 3 HP single phase motor develops 6 HP. 5,000 rpm with 15.0 amp draw at 220V. 2 feed rates: 16, 20 fpm, 3" diameter, 3-knife cutter head with jack screws for accurate knife adjustment, replacement. Exterior adjustment for in-feed and out-fee roller pressure and chip breaker without disassembling. Anti-kickback feature. Totally enclosed welded plate steel cabinet measures 22-1/2" x 20-3/4" x 23-1/2" with built-in chip chute. 45"H x 31"W x 32"D 14-gauge, 3-wire harness for motor. Push button emergency stop button. Key lock helps prevent unauthorized use.

Craftsman 12 in. Industrial-Rated Table Saw
Part #F9-22692   $2,900.37
3 HP motor develops 6 HP max. Extra-wide 48" x 30" work surface. Solid surface cast iron table has two parallel miter gauge "T" slots for "T" blocks. Easy-glide 39-1/2" rip fence with front, rear guide support rails permits 50" cut to right of blade; works on both sides. Quick-release front tension grips. Front guide rail scale with magnified window, calibrated in inches and millimeters, is indexed to show distance between blade and rip fence. 1" arbor is changeable to 5/8" for dadoing; blade tilts to 45 degree maximum cut. Accessory kit: two 1" blocks, screws; 3-, 5-, 8mm hex wrenches; 3 double-ended spanner wrenches: 11-13mm, 12-14mm, 17-19mm; 2-pin spanner wrench for easy arbor installation. Rip fence, dado plate, arbors, miter gauge, motor, pulley, belts. Magnetic contactor. 240-volt, single-phase, 3450 RPM, 3 HP motor. Steel cabinet, 4" sawdust exhaust port. Lock-out switch helps prevent unauthorized use. 46"D x 77"W x 42"H.

Craftsman 10 in. 3 HP Table Saw
Part #F9-22694   $2,356.55
Develops maximum 6 HP. Solid cast-iron table. 36" x 27" work surface. Rip fence positions right or left; 50" width of cut to right of blade. 10-1/4" to left. Depth of cut is 3" at 90 degrees, 2-1/8" at 45 degrees, 5/8" blade arbor insert, miter gauge. T-slot miter gauge guides on either side of blade. Includes 5/8" dado arbor and insert, magnetic contactor with overload relay and emergency on-off switch. 240 volt, single phase, 3,450 rpm motor. 4" exhaust port. 43"D x 77"W x 38"H.

Craftsman 3/4 HP Wood Cutting Band Saw
Part #F9-24393   $1,297.35
Solid cast iron table, tilts up to 45 degrees, 1-piece unitized steel body, includes rip fence and miter gauge. 110 volt, 1,725 RPM single phase motor. 15" wheel diameter, 14-5/8" blade to column, 8-1/2" max. cut thickness, 15" x 15" table size, 3/16"-3/4" blade width, blade length 107" minimum, 111" maximum. 2,000, 3000 speed (FPM), 3/4 HP motor.

Craftsman 1 HP Wood Cutting Band Saw
Part #F9-24396   $2,591.14
Solid cast iron table, tilts up to 45 degrees, 1-piece unitized steel body, includes rip fence and miter gauge. 110 volt, 1,725 RPM single phase motor. 18" wheel diameter, 17-1/2" blade to column, 11" max. cut thickness, 19" x 18" table size, 3/16"-1" blade width, blade length 132" minimum, 134" maximum. 2,000, 3000 speed (FPM), 1 HP motor.

Craftsman 3/4 HP Metal Cutting Band Saw
Part #F9-24397   $1,851.83
Solid cast iron table, tilts up to 45 degrees, 1-piece unitized steel body, includes rip fence and miter gauge. 110 volt, 1,725 RPM single phase motor. 15" wheel diameter, 14-5/8" blade to column, 8-1/2" max. cut thickness, 15" x 15" table size, 3/16"-3/4" blade width, blade length 107" minimum, 111" maximum. 80, 150, 200 speed (FPM), 3/4 HP motor.